Bayesian Business Continuity Analytics for Cyber-Disrupted Industrial Process Workflows
DOI:
https://doi.org/10.63646/TJRK5925Keywords:
Bayesian networks; business continuity; industrial cyber-physical systems; operational technology; cyber resilience; workflow dependencies; decision analytics; value of informationAbstract
Industrial process workflows depend on interconnected operational technology, information systems, people, and external services. When a cyber incident interrupts or undermines confidence in one dependency, continuity decisions must be made before the state of the whole workflow is known. This article develops a Bayesian decision framework that connects uncertain cyber and physical states to production, quality release, contractual obligations, and recovery choices. A dynamic Bayesian network represents evolving asset and workflow states; evidence from security alerts, process observations, and verified recovery checks updates the posterior distribution. A decision layer evaluates feasible actions in terms of expected business loss, service shortfall, and, where appropriate, downside risk, subject to independently assessed safety and operational constraints. The framework makes explicit the difference between inferring a state, predicting an outcome under an action, and authorizing an intervention. A fully specified hypothetical example illustrates how an imperfect diagnostic signal changes a choice between controlled shutdown and a conditionally available isolated operating mode. With an initial compromise probability of 0.20 and the stated loss assumptions, the minimum expected loss falls from 28 to 20 thousand US dollars before a diagnostic cost; the expected value of the signal is therefore 8 thousand US dollars. This is an analytical illustration, not an empirical estimate or a claim of tested plant performance. The article discusses dependence, sparse data, calibration, model governance, and a prospective evaluation design. Its contribution is a transparent bridge from evolving evidence to safety-constrained continuity decisions, with a reproducible example and clearly stated limits on operational use.
How to Cite
References
Abraham, D., Erceylan, G., Gkioulos, V., & Houmb, S. H. (2025). Towards enhanced cybersecurity in industrial control systems: A systematic review of context-based modeling, digital twins, and machine learning approaches. International Journal of Information Security, 24(6), 243. https://doi.org/10.1007/s10207-025-01158-1
Adedigba, S. A., Khan, F., & Yang, M. (2017). Dynamic failure analysis of process systems using principal component analysis and Bayesian network. Industrial & Engineering Chemistry Research, 56(8), 2094–2106. https://doi.org/10.1021/acs.iecr.6b03356
Alexopoulos, K., Anagiannis, I., Nikolakis, N., & Chryssolouris, G. (2022). A quantitative approach to resilience in manufacturing systems. International Journal of Production Research, 60(24), 7178–7193. https://doi.org/10.1080/00207543.2021.2018519
Amin, M. T., & Khan, F. (2022). Dynamic process safety assessment using adaptive Bayesian network with loss function. Industrial & Engineering Chemistry Research, 61(45), 16799–16814. https://doi.org/10.1021/acs.iecr.2c03080
Bagozi, A., Bianchini, D., & Antonellis, V. D. (2021). Context-based resilience in cyber-physical production system. Data Science and Engineering, 6(4), 434–454. https://doi.org/10.1007/s41019-021-00172-2
Bhosale, P., Kastner, W., & Sauter, T. (2024). AutomationML meets Bayesian networks: A comprehensive safety-security risk assessment in industrial control systems. IEEE Open Journal of the Industrial Electronics Society, 5, 823–835. https://doi.org/10.1109/ojies.2024.3439388
Cassottana, B., Roomi, M. M., Mashima, D., & Sansavini, G. (2023). Resilience analysis of cyber‐physical systems: A review of models and methods. Risk Analysis, 43(11), 2359–2379. https://doi.org/10.1111/risa.14089
Chaves, A., Rice, M., Dunlap, S., & Pecarina, J. (2017). Improving the cyber resilience of industrial control systems. International Journal of Critical Infrastructure Protection, 17, 30–48. https://doi.org/10.1016/j.ijcip.2017.03.005
Chen, L., Dui, H., & Zhang, C. (2020). A resilience measure for supply chain systems considering the interruption with the cyber-physical systems. Reliability Engineering & System Safety, 199, 106869. https://doi.org/10.1016/j.ress.2020.106869
Chockalingam, S., Pieters, W., Teixeira, A., & van Gelder, P. (2021). Bayesian network model to distinguish between intentional attacks and accidental technical failures: A case study of floodgates. Cybersecurity, 4(1), 29. https://doi.org/10.1186/s42400-021-00086-6
Ding, D., Han, Q. L., Xiang, Y., Ge, X., & Zhang, X. M. (2018). A survey on security control and attack detection for industrial cyber-physical systems. Neurocomputing, 275, 1674–1683. https://doi.org/10.1016/j.neucom.2017.10.009
Dolgui, A., Ivanov, D., & Sokolov, B. (2018). Ripple effect in the supply chain: An analysis and recent literature. International Journal of Production Research, 56(1-2), 414–430. https://doi.org/10.1080/00207543.2017.1387680
Dowdeswell, B., Sinha, R., & MacDonell, S. G. (2020). Finding faults: A scoping study of fault diagnostics for industrial cyber–physical systems. Journal of Systems and Software, 168, 110638. https://doi.org/10.1016/j.jss.2020.110638
Faramondi, L., Flammini, F., Guarino, S., & Setola, R. (2023). A hybrid behavior- and Bayesian network-based framework for cyber–physical anomaly detection. Computers and Electrical Engineering, 112, 108988. https://doi.org/10.1016/j.compeleceng.2023.108988
Garvey, M. D., Carnovale, S., & Yeniyurt, S. (2015). An analytical framework for supply network risk propagation: A Bayesian network approach. European Journal of Operational Research, 243(2), 618–627. https://doi.org/10.1016/j.ejor.2014.10.034
Ghaljahi, M., Omidi, L., & Karimi, A. (2025). Resilience assessment in process industries: A review of literature. Heliyon, 11(4), e42498. https://doi.org/10.1016/j.heliyon.2025.e42498
Giraldo, J., Urbina, D., Cárdenas, Á., Valente, J., Faisal, M., Ruths, J., Tippenhauer, N. O., Sandberg, H., & Candell, R. (2018). A survey of physics-based attack detection in cyber-physical systems. ACM Computing Surveys, 51(4), Article 76. https://doi.org/10.1145/3203245
Heath, E. A., Mitchell, J. E., & Sharkey, T. C. (2020). Models for restoration decision making for a supply chain network after a cyber attack. The Journal of Defense Modeling and Simulation: Applications, Methodology, Technology, 17(1), 5–19. https://doi.org/10.1177/1548512918808410
Hossain, N. U. I., Jaradat, R., Hosseini, S., Marufuzzaman, M., & Buchanan, R. K. (2019). A framework for modeling and assessing system resilience using a Bayesian network: A case study of an interdependent electrical infrastructure system. International Journal of Critical Infrastructure Protection, 25, 62–83. https://doi.org/10.1016/j.ijcip.2019.02.002
Hossain, N. U. I., Nur, F., Hosseini, S., Jaradat, R., Marufuzzaman, M., & Puryear, S. M. (2019). A Bayesian network based approach for modeling and assessing resilience: A case study of a full service deep water port. Reliability Engineering & System Safety, 189, 378–396. https://doi.org/10.1016/j.ress.2019.04.037
Hosseini, S., Al Khaled, A., & Sarder, M. (2016). A general framework for assessing system resilience using Bayesian networks: A case study of sulfuric acid manufacturer. Journal of Manufacturing Systems, 41, 211–227. https://doi.org/10.1016/j.jmsy.2016.09.006
Hosseini, S., & Ivanov, D. (2020). Bayesian networks for supply chain risk, resilience and ripple effect analysis: A literature review. Expert Systems with Applications, 161, 113649. https://doi.org/10.1016/j.eswa.2020.113649
Hosseini, S., & Ivanov, D. (2022a). A multi-layer Bayesian network method for supply chain disruption modelling in the wake of the COVID-19 pandemic. International Journal of Production Research, 60(17), 5258–5276. https://doi.org/10.1080/00207543.2021.1953180
Hosseini, S., & Ivanov, D. (2022b). A new resilience measure for supply networks with the ripple effect considerations: A Bayesian network approach. Annals of Operations Research, 319(1), 581–607. https://doi.org/10.1007/s10479-019-03350-8
Hosseini, S., Ivanov, D., & Dolgui, A. (2019). Review of quantitative methods for supply chain resilience analysis. Transportation Research Part E: Logistics and Transportation Review, 125, 285–307. https://doi.org/10.1016/j.tre.2019.03.001
Hosseini, S., Ivanov, D., & Dolgui, A. (2020). Ripple effect modelling of supplier disruption: Integrated Markov chain and dynamic Bayesian network approach. International Journal of Production Research, 58(11), 3284–3303. https://doi.org/10.1080/00207543.2019.1661538
Jbair, M., Ahmad, B., Maple, C., & Harrison, R. (2022). Threat modelling for industrial cyber physical systems in the era of smart manufacturing. Computers in Industry, 137, 103611. https://doi.org/10.1016/j.compind.2022.103611
Kanes, R., Ramirez Marengo, M. C., Abdel-Moati, H., Cranefield, J., & Véchot, L. (2017). Developing a framework for dynamic risk assessment using Bayesian networks and reliability data. Journal of Loss Prevention in the Process Industries, 50, 142–153. https://doi.org/10.1016/j.jlp.2017.09.011
Knowles, W., Prince, D., Hutchison, D., Disso, J. F. P., & Jones, K. (2015). A survey of cyber security management in industrial control systems. International Journal of Critical Infrastructure Protection, 9, 52–80. https://doi.org/10.1016/j.ijcip.2015.02.002
Liu, M., Liu, Z., Chu, F., Zheng, F., & Chu, C. (2021). A new robust dynamic Bayesian network approach for disruption risk assessment under the supply chain ripple effect. International Journal of Production Research, 59(1), 265–285. https://doi.org/10.1080/00207543.2020.1841318
Liu, M., Tang, H., Chu, F., Ding, Y., Zheng, F., & Chu, C. (2024). A signomial programming-based approach for multi-echelon supply chain disruption risk assessment with robust dynamic Bayesian network. Computers & Operations Research, 161, 106422. https://doi.org/10.1016/j.cor.2023.106422
Moghaddam, M., & Deshmukh, A. (2019). Resilience of cyber-physical manufacturing control systems. Manufacturing Letters, 20, 40–44. https://doi.org/10.1016/j.mfglet.2019.05.002
Ojha, R., Ghadge, A., Tiwari, M. K., & Bititci, U. S. (2018). Bayesian network modelling for supply chain risk propagation. International Journal of Production Research, 56(17), 5795–5819. https://doi.org/10.1080/00207543.2018.1467059
Rotibi, A. O., Saxena, N., Burnap, P., & Read, C. (2025). System-level operational cyber risks identification in industrial control systems. Cyber-Physical Systems, 11(3), 265–296. https://doi.org/10.1080/23335777.2024.2373388
Ruskey, B., & Rosenberg, E. (2022). Minimizing risk in Bayesian supply chain networks. Computers & Industrial Engineering, 169, 108134. https://doi.org/10.1016/j.cie.2022.108134
Tong, Q., & Gernay, T. (2023). Resilience assessment of process industry facilities using dynamic Bayesian networks. Process Safety and Environmental Protection, 169, 547–563. https://doi.org/10.1016/j.psep.2022.11.048
Tong, Q., Yang, M., & Zinetullina, A. (2020). A dynamic Bayesian network-based approach to resilience assessment of engineered systems. Journal of Loss Prevention in the Process Industries, 65, 104152. https://doi.org/10.1016/j.jlp.2020.104152
Torabi, S. A., Giahi, R., & Sahebjamnia, N. (2016). An enhanced risk assessment framework for business continuity management systems. Safety Science, 89, 201–218. https://doi.org/10.1016/j.ssci.2016.06.015
Yuan, S., Reniers, G., & Yang, M. (2024). Integrated management of safety and security barriers in chemical plants to cope with emerging cyber-physical attack risks under uncertainties. Reliability Engineering & System Safety, 250, 110320. https://doi.org/10.1016/j.ress.2024.110320
Yuan, S., Yang, M., & Reniers, G. (2024). Integrated process safety and process security risk assessment of industrial cyber-physical systems in chemical plants. Computers in Industry, 155, 104056. https://doi.org/10.1016/j.compind.2023.104056
Zarei, E., Azadeh, A., Aliabadi, M. M., & Mohammadfam, I. (2017). Dynamic safety risk modeling of process systems using Bayesian network. Process Safety Progress, 36(4), 399–407. https://doi.org/10.1002/prs.11889
Żebrowski, P., Couce‐Vieira, A., & Mancuso, A. (2022). A Bayesian framework for the analysis and optimal mitigation of cyber threats to cyber‐physical systems. Risk Analysis, 42(10), 2275–2290. https://doi.org/10.1111/risa.13900
Zhang, L., Zhou, J., Ma, Y., Wang, X., & Zhang, F. (2024). Resilience improvement of cyber-physical supply chain networks considering cascading failures with mixed failure modes. Computers & Industrial Engineering, 187, 109812. https://doi.org/10.1016/j.cie.2023.109812
Zhang, Q., Zhou, C., Tian, Y. C., Xiong, N., Qin, Y., & Hu, B. (2018). A fuzzy probability Bayesian network approach for dynamic cybersecurity risk assessment in industrial control systems. IEEE Transactions on Industrial Informatics, 14(6), 2497–2506. https://doi.org/10.1109/tii.2017.2768998
Zhu, Q., Qin, Y., Zhou, C., & Gao, W. (2018). Extended multilevel flow model-based dynamic risk assessment for cybersecurity protection in industrial production systems. International Journal of Distributed Sensor Networks, 14(6), 1550147718779564. https://doi.org/10.1177/1550147718779564