An Edge-Coupled Digital Twin Laboratory for Remote, Real-Time Engineering Experiments

DOI:

https://doi.org/10.63646/MOSP4837

Keywords:

Digital Twin, Edge Computing, Remote Laboratory, Engineering Education, Real-Time Experimentation, Cyber-Physical Systems

Abstract

This article specifies an edge-coupled digital twin laboratory for remote, real-time engineering experiments. It addresses a design gap between conventional remote laboratories, which expose learners to physical equipment over a network, virtual laboratories, which emulate equipment in software, and digital twins, which maintain a governed relationship between a physical asset and a computational representation. The proposed system connects a safe teaching rig to a local edge gateway, a versioned twin and experiment service, a cloud course workspace, and learner and instructor clients. The edge performs timestamp normalization, sensor-quality checks, bounded command validation, buffering, and local observability; it does not replace the rig’s local safety controller or make network latency safety-critical. The twin represents measured state, model state, uncertainty, and synchronization status as separate values. Learners plan an experiment, request an approved run, observe time-aligned data, compare measured and predicted behavior, explain residuals, and revise a model or procedure. The paper defines system requirements, architecture, data and control contracts, instructional orchestration, assessment evidence, accessibility and governance safeguards, a synthetic motor-control walkthrough, and a verification matrix. The walkthrough and tests are design artifacts rather than implementation or empirical results. The contribution is an implementation-ready specification for integrating remote experimentation, edge computing, and digital-twin reasoning into engineering education without overstating fidelity, safety authority, or learning effectiveness.

How to Cite

Zhang, M., & Chen, J. (2025). An Edge-Coupled Digital Twin Laboratory for Remote, Real-Time Engineering Experiments. Trends and Reviews of Technological Engineering in Education, 1(1), 80-106. https://doi.org/10.63646/MOSP4837

References

Balamuralithara, B., & Woods, P. C. (2009). Virtual laboratories in engineering education: The simulation lab and remote lab. Computer Applications in Engineering Education, 17(1), 108–118. https://doi.org/10.1002/cae.20186

Potkonjak, V., Gardner, M., Callaghan, V., Mattila, P., Guetl, C., Petrović, V. M., & Jovanović, K. (2016). Virtual laboratories for education in science, technology, and engineering: A review. Computers & Education, 95, 309–327. https://doi.org/10.1016/j.compedu.2016.02.002

Ma, J., & Nickerson, J. V. (2006). Hands-on, simulated, and remote laboratories: A comparative literature review. ACM Computing Surveys, 38(3), Article 7. https://doi.org/10.1145/1132960.1132961

Brinson, J. R. (2015). Learning outcome achievement in non-traditional (virtual and remote) versus traditional (hands-on) laboratories: A review of the empirical research. Computers & Education, 87, 218–237. https://doi.org/10.1016/j.compedu.2015.07.003

Lindsay, E. D., & Good, M. C. (2005). Effects of laboratory access modes upon learning outcomes. IEEE Transactions on Education, 48(4), 619–631. https://doi.org/10.1109/TE.2005.852591

Ionescu, C., Fabregas Acosta, E., Cristescu, S. M., Dormido, S., & De Keyser, R. (2013). A remote laboratory as an innovative educational tool for practicing control engineering concepts. IEEE Transactions on Education, 56(4), 436–442. https://doi.org/10.1109/TE.2013.2249516

Beemt, A. van den, Groothuijsen, S., Ozkan, L., & Hendrix, W. (2023). Remote labs in higher engineering education: Engaging students with active learning pedagogy. Journal of Computing in Higher Education, 35, 320–340. https://doi.org/10.1007/s12528-022-09331-4

May, D., Terkowsky, C., Varney, V., & Boehringer, D. (2023). Online laboratories in higher engineering education: Solutions, challenges, and future directions from a pedagogical perspective. European Journal of Engineering Education, 48(5), 779–782. https://doi.org/10.1080/03043797.2023.2248820

Kritzinger, W., Karner, M., Traar, G., Henjes, J., & Sihn, W. (2018). Digital twin in manufacturing: A categorical literature review and classification. IFAC-PapersOnLine, 51(11), 1016–1022. https://doi.org/10.1016/j.ifacol.2018.08.474

Fuller, A., Fan, Z., Day, C., & Barlow, C. (2020). Digital twin: Enabling technologies, challenges and open research. IEEE Access, 8, 108952–108971. https://doi.org/10.1109/ACCESS.2020.2998358

Jones, D., Snider, C., Nassehi, A., Yon, J., & Hicks, B. (2020). Characterising the digital twin: A systematic literature review. CIRP Journal of Manufacturing Science and Technology, 29, 36–52. https://doi.org/10.1016/j.cirpj.2020.02.002

Rasheed, A., San, O., & Kvamsdal, T. (2020). Digital twin: Values, challenges and enablers from a modeling perspective. IEEE Access, 8, 21980–22012. https://doi.org/10.1109/ACCESS.2020.2970143

Boje, C., Guerriero, A., Kubicki, S., & Rezgui, Y. (2020). Towards a semantic construction digital twin: Directions for future research. Automation in Construction, 114, 103179. https://doi.org/10.1016/j.autcon.2020.103179

Reeves, S. M., & Crippen, K. J. (2021). Virtual laboratories in undergraduate science and engineering courses: A systematic review, 2009–2019. Journal of Science Education and Technology, 30, 16–30. https://doi.org/10.1007/s10956-020-09866-0

Heradio, R., de la Torre, L., & Dormido, S. (2016). Virtual and remote labs in control education: A survey. Annual Reviews in Control, 42, 1–10. https://doi.org/10.1016/j.arcontrol.2016.08.001

Garcia-Zubia, J., Gustavsson, I., Hernandez-Jayo, U., Orduna, P., Angulo, I., Dziabenko, O., Rodriguez, L., & Lopez-de-Ipiña, D. (2011). Using VISIR: Experiments, subjects and students. International Journal of Online Engineering, 7(S2), 11–14. https://doi.org/10.3991/ijoe.v7iS2.1769

Gustavsson, I., Nilsson, K., Zackrisson, J., Garcia-Zubia, J., Hernandez-Jayo, U., Nafalski, A., Nedic, Z., Göl, Ö., Machotka, J., Pettersson, M. I., Lagö, T., & Håkansson, L. (2009). On objectives of instructional laboratories, individual assessment, and use of collaborative remote laboratories. IEEE Transactions on Learning Technologies, 2(4), 263–274. https://doi.org/10.1109/TLT.2009.42

Chevalier, A., Copot, C., Ionescu, C. M., & De Keyser, R. (2017). A three-year feedback study of a remote laboratory used in control engineering studies. IEEE Transactions on Education, 60(2), 127–133. https://doi.org/10.1109/TE.2016.2605080

Feisel, L. D., & Rosa, A. J. (2005). The role of the laboratory in undergraduate engineering education. Journal of Engineering Education, 94(1), 121–130. https://doi.org/10.1002/j.2168-9830.2005.tb00833.x

Kolb, D. A. (1984). Experiential learning: Experience as the source of learning and development. Prentice-Hall.

Biggs, J. (1996). Enhancing teaching through constructive alignment. Higher Education, 32(3), 347–364. https://doi.org/10.1007/BF00138871

Prince, M. J. (2004). Does active learning work? A review of the research. Journal of Engineering Education, 93(3), 223–231. https://doi.org/10.1002/j.2168-9830.2004.tb00809.x

Qi, Q., & Tao, F. (2018). Digital twin and big data towards smart manufacturing and Industry 4.0: 360 degree comparison. IEEE Access, 6, 3585–3593. https://doi.org/10.1109/ACCESS.2018.2793265

Jiang, F., Ma, L., Broyd, T., & Chen, K. (2021). Digital twin and its implementations in the civil engineering sector. Automation in Construction, 130, 103838. https://doi.org/10.1016/j.autcon.2021.103838

Sacks, R., Brilakis, I., Pikas, E., Xie, H. S., & Girolami, M. (2020). Construction with digital twin information systems. Data-Centric Engineering, 1, e14. https://doi.org/10.1017/dce.2020.16

Tao, F., Cheng, J., Qi, Q., Zhang, M., Zhang, H., & Sui, F. (2018). Digital twin-driven product design, manufacturing and service with big data. The International Journal of Advanced Manufacturing Technology, 94(9–12), 3563–3576. https://doi.org/10.1007/s00170-017-0233-1

Tao, F., Zhang, H., Liu, A., & Nee, A. Y. C. (2019). Digital twin in industry: State-of-the-art. IEEE Transactions on Industrial Informatics, 15(4), 2405–2415. https://doi.org/10.1109/TII.2018.2873186

Shi, W., Cao, J., Zhang, Q., Li, Y., & Xu, L. (2016). Edge computing: Vision and challenges. IEEE Internet of Things Journal, 3(5), 637–646. https://doi.org/10.1109/JIOT.2016.2579198

Satyanarayanan, M. (2017). The emergence of edge computing. Computer, 50(1), 30–39. https://doi.org/10.1109/MC.2017.9

Mao, Y., You, C., Zhang, J., Huang, K., & Letaief, K. B. (2017). A survey on mobile edge computing: The communication perspective. IEEE Communications Surveys & Tutorials, 19(4), 2322–2358. https://doi.org/10.1109/COMST.2017.2745201

Mach, P., & Becvar, Z. (2017). Mobile edge computing: A survey on architecture and computation offloading. IEEE Communications Surveys & Tutorials, 19(3), 1628–1656. https://doi.org/10.1109/COMST.2017.2682318

Shi, W., & Dustdar, S. (2016). The promise of edge computing. Computer, 49(5), 78–81. https://doi.org/10.1109/MC.2016.145

Chiang, M., & Zhang, T. (2016). Fog and IoT: An overview of research opportunities. IEEE Internet of Things Journal, 3(6), 854–864. https://doi.org/10.1109/JIOT.2016.2584538

Lu, Y., Huang, X., Dai, Y., Maharjan, S., & Zhang, Y. (2020). Blockchain and federated learning for privacy-preserved data sharing in industrial IoT. IEEE Transactions on Industrial Informatics, 16(6), 4177–4186. https://doi.org/10.1109/TII.2019.2942190

Li, S., Da Xu, L., & Zhao, S. (2015). The internet of things: A survey. Information Systems Frontiers, 17, 243–259. https://doi.org/10.1007/s10796-014-9492-7

Liang, S., Khalafbeigi, T., & van der Schaaf, H. (Eds.). (2021). OGC SensorThings API Part 1: Sensing Version 1.1. Open Geospatial Consortium.

Lebo, T., Sahoo, S., & McGuinness, D. (Eds.). (2013). PROV-O: The PROV Ontology. W3C Recommendation.

Open Platform Communications Foundation. (2022). OPC Unified Architecture specification. https://opcfoundation.org/developer-tools/specifications-unified-architecture/

Stouffer, K., Pease, M., Tang, C., Zimmerman, T., Pillitteri, V., Lightman, S., Hahn, A., Saravia, S., Sherule, A., & Thompson, M. (2023). Guide to operational technology (OT) security (NIST SP 800-82 Rev. 3). NIST. https://doi.org/10.6028/NIST.SP.800-82r3

International Organization for Standardization. (2022). ISO/IEC 27001:2022 Information security, cybersecurity and privacy protection—Information security management systems—Requirements. ISO.

International Organization for Standardization. (2022). ISO/IEC 27002:2022 Information security, cybersecurity and privacy protection—Information security controls. ISO.

International Organization for Standardization. (2018). ISO 31000:2018 Risk management—Guidelines. ISO.

Garcia-Zubia, J., Orduña, P., López-de-Ipiña, D., & Alves, G. (2009). Addressing software impact in the design of remote laboratories. IEEE Transactions on Industrial Electronics, 56(12), 4757–4767. https://doi.org/10.1109/TIE.2009.2026368

Ogot, M., Elliott, G., & Glumac, N. (2003). An assessment of in-person and remotely operated laboratories. Journal of Engineering Education, 92(1), 57–64. https://doi.org/10.1002/j.2168-9830.2003.tb00738.x

Gurocak, H., Jayaram, S., & Parrish, K. (2001). e-Lab: An electronic classroom for real-time distance delivery of a laboratory course. Journal of Engineering Education, 90(4), 695–705. https://doi.org/10.1002/j.2168-9830.2001.tb00661.x

Stefanovic, M. (2013). The objectives, architectures and effects of distance learning laboratories for industrial engineering education. Computers & Education, 69, 250–262. https://doi.org/10.1016/j.compedu.2013.07.011

Stefanovic, M., Tadic, D., Nestic, S., & Djordjevic, A. (2015). An assessment of distance learning laboratory objectives for control engineering education. Computer Applications in Engineering Education, 23(2), 191–202. https://doi.org/10.1002/cae.21589

Tjahyadi, H., Prasetya, K., & Murwantara, I. (2023). Digital twin based laboratory for control engineering education. International Journal of Information and Education Technology, 13(4), 704–711. https://doi.org/10.18178/ijiet.2023.13.4.1856

Boettcher, K., Terkowsky, C., Schade, M., Brandner, D., Grünendahl, S., & Pasaliu, B. (2023). Developing a real-world scenario to foster learning and working 4.0: On using a digital twin of a jet pump experiment in process engineering laboratory education. European Journal of Engineering Education, 48(5), 949–971. https://doi.org/10.1080/03043797.2023.2182184

Li, J., & Liang, W. (2024). Effectiveness of virtual laboratory in engineering education: A meta-analysis. PLOS ONE, 19(12), e0316269. https://doi.org/10.1371/journal.pone.0316269

Elmoazen, R., Saqr, M., Khalil, M., & Wasson, B. (2023). Learning analytics in virtual laboratories: A systematic literature review of empirical research. Smart Learning Environments, 10, 23. https://doi.org/10.1186/s40561-023-00244-y

Guc, F., Viola, J., & Chen, Y. (2021). Digital twins enabled remote laboratory learning experience for mechatronics education. 2021 IEEE International Conference on Digital Twins and Parallel Intelligence, 242–245. https://doi.org/10.1109/DTPI52967.2021.9540196

Deniz, S., Müller, U. C., Steiner, I., & Sergi, T. (2021). Online (remote) teaching for laboratory-based courses using digital twins of the experiments. Proceedings of the ASME Turbo Expo 2021: Turbomachinery Technical Conference and Exposition, GT2021-58697. https://doi.org/10.1115/GT2021-58697

Beghi, A., Cervato, A., & Rampazzo, M. (2015). A remote refrigeration laboratory for control engineering education. IFAC-PapersOnLine, 48(29), 25–30. https://doi.org/10.1016/j.ifacol.2015.11.208

Sharma, A., Kosasih, E., Zhang, J., Brintrup, A., & Calinescu, A. (2022). Digital twins: State of the art theory and practice, challenges, and open research questions. Journal of Industrial Information Integration, 30, 100383. https://doi.org/10.1016/j.jii.2022.100383

Nedic, Z., Machotka, J., & Nafalski, A. (2003). Remote laboratories versus virtual and real laboratories. 33rd Annual Frontiers in Education Conference, T3E-1–T3E-6. https://doi.org/10.1109/FIE.2003.1263343

Harward, V. J., del Alamo, J. A., Lerman, S. R., Bailey, P. H., Carpenter, J., DeLong, K., Felknor, C., Hardison, J., Harrison, B., Jabbour, I., Long, P. D., Mao, T., Naamani, L., Northridge, J., Schulz, M., Talavera, D., Varadharajan, C., Wang, S., Yehia, K., Zbib, R., & Zych, D. (2008). The iLab shared architecture: A web services infrastructure to build communities of Internet accessible laboratories. Proceedings of the IEEE, 96(6), 931–950. https://doi.org/10.1109/JPROC.2008.921607

Qiao, Y., Liu, G.-P., Zheng, G., & Hu, W. (2010). NCSLab: A web-based global-scale control laboratory with rich interactive features. IEEE Transactions on Industrial Electronics, 57(10), 3253–3265. https://doi.org/10.1109/TIE.2009.2027924